Meca500 - Mitsubishi FX PLC Integration

This MecaNetwork example is sponsored byGibson Engineering


This MecaNetwork example features the Meca500 being used with a Mitsubishi FX5 PLC over TCP/IP.

For the sample code or a customized solution, please get in touch with Gibson Engineering.


Meca500 Robot :Go to site

Meca500 Firmware version 8.1.6 or above is required:Go to site

Mitsubishi FX5UC-32MT/DSS-TS PLC :Go to site


Mecademic Function block Write-up Ver 2.0:User Guide with the setup steps

项目文件,PLC公关oject files and writeup:Go to site

Please note that these examples are provided as-is by either Mecademic or it's Partners. These can be used as a starting point for development and testing but Mecademic or it's partners are not under obligation to provide support and are not liable for any errors or unintended behavior caused by the examples. These examples could be updated over time.

Did you find it helpful?YesNo

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.